Technical parameters:
|
input voltage
|
Three phase AC380V ± 10%, 50Hz ~ 60Hz
|
|
Current stabilizing accuracy
|
≦1%~0.5%
|
|
Voltage stabilizing accuracy
|
≦1%
|
|
power factor
|
≧0.95
|
|
Rated efficiency
|
≧92%
|
|
Ripple coefficient
|
≦1%~0.5%
|
|
work environment
|
-10℃~45℃
|
|
Storage temperature
|
-20℃~50℃
|
|
Insulation class
|
Class A
|
|
Cold removal mode
|
Full water cooling Inlet water temperature: 25 ℃ ~ 35 ℃
Outlet water temperature: 38 ℃
Water pressure: 0.1 ~ 0.25mp PH value 7 ~ 8
Use deionized water or tap water,
Conductivity of water: ≤ 50uS / cm
|
|
Operating load
|
48 hour operation at full load
|
|
Environmental requirements
|
RoHS compliant
|
|
Safety regulations and standards
|
Comply with EU CE standards: 2006 / 95 / EC, 2004 / 108 / CE
|
|
IP protection class
|
IP33
|
Product details:
Rectifier features:
● ultra low ripple coefficient, high current precision and high coating uniformity.
● high frequency, 15.625kHz ~ 125kHz, small volume, light weight and beautiful appearance.
● high power factor, high efficiency, energy saving and environmental protection.
● the power module adopts advanced sealing design imported from Japan. It is acid and alkali resistant and can be placed directly in every corner of the electroplating tank.
● built in soft start, over temperature, over voltage, overload, short circuit and current limiting protection functions.
● the control system adopts international RS485 network control, PROFIBUS DP, network control, device net, ad control and standard 4 ~ 20mA control functions.
● the rectifier control output current adopts double output distribution to promote the consistency of current on both sides of a / b of VCP electroplating tank, and the current distribution is very uniform, so as to solve the problem of current error on traditional A / B side
(originally, the current distribution depends on the conductive resistance of cable or copper bar to determine the current distribution. The error range is more than 10%. The power of dual output rectifier The flow distribution is controlled independently,
Side a 500A and side B 500A (error range less than 1%).
● ultra low ripple and high frequency design scheme can effectively improve the coating uniformity of vertical continuous plating (VCP) line pair, which can reach more than 96%.
Product specification:
|
Rated transmission
Output voltage
|
Rated transmission
Outgoing current
|
Overall dimension
|
|
Length (mm)
|
Width (mm)
|
Height (mm)
|
|
5V
|
1000A
|
five hundred and three
|
four hundred and forty-six
|
one hundred and fifty-three
|
|
6V
|
800A
|
W4000d5 fully water cooled 6V/800A
Operating system: remote control
※ output current of different models shall be made according to customer requirements ※
Your location：
QQ
Website 
