Your location:Home         > Products
         > MTB air cooled synchronous high frequency switching power supply
 > ZHS-MTB air-cooled series synchronous high frequency switching power supply
 
 
 
 Technical parameters:
| 
                 input voltage  | 
            
                 Three phase AC380V ±10%/、50HZ~60HZ  | 
        
| 
                 Current stabilizing accuracy  | 
            
                 ≦1%~0.5%  | 
        
| 
                 Voltage stabilizing accuracy  | 
            
                 ≦1%  | 
        
| 
                 power factor  | 
            
                 ≧0.99  | 
        
| 
                 Rated efficiency  | 
            
                 ≧95%  | 
        
| 
                 Ripple coefficient  | 
            
                 ≦1%~0.5%  | 
        
| 
                 work environment  | 
            
                 -10℃~45℃  | 
        
| 
                 Storage temperature  | 
            
                 -20℃~50℃  | 
        
| 
                 Insulation class  | 
            
                 Class A  | 
        
| 
                 Cooling mode  | 
            
                 Air cooling  | 
        
| 
                 Operating load  | 
            
                 48 hour operation at full load  | 
        
| 
                 Environmental requirements  | 
            
                 RoHS compliant  | 
        
| 
                 Safety regulations and standards  | 
            
                 Comply with EU CE standards: 2006 / 95 / EC, 2004 / 108 / CE  | 
        
| 
                 IP protection class  | 
            
                 IP33  | 
        
Product details:
    Rectifier features:
  
● ultra low ripple coefficient, high current precision and high coating uniformity.
● high frequency 85khz, small volume, light weight and beautiful appearance.
● high power factor, high efficiency, energy saving and environmental protection.
● the power module adopts advanced sealing design imported from Japan. It is acid and alkali resistant and can be placed directly in every corner of the electroplating tank.
● built in soft start, over temperature, over voltage, overload, short circuit and current limiting protection functions.
● the control system adopts international RS485 network control, PROFIBUS DP, network control, device net, ad control and standard 4 ~ 20mA control functions.
● modular automatic current sharing function is adopted for output to ensure the improvement of electroplating process quality.
● synchronous rectifier output current technology uses power with extremely low on state resistance (MOSFET) to replace rectifier diode, which can greatly reduce the voltage drop loss of rectifier circuit (0.1V ~ 0.2V) and improve the efficiency of DC / DC converter by more than 94%.
● the ultra-low ripple and high frequency design scheme can effectively improve the ultra-high frequency switching power supply required for the configuration of vertical continuous plating (VCP) line, and the coating uniformity can reach more than 96%.
  
Product specification:
| 
                 Rated transmission Output voltage  | 
            
                 Rated transmission Outgoing current  | 
            
                 Overall dimension  | 
        ||
| 
                 Length (mm)  | 
            
                 Width (mm)  | 
            
                 Height (mm)  | 
        ||
| 
                 5V  | 
            
                 400A  | 
            
                 four hundred and thirty  | 
            
                 one hundred and sixty  | 
            
                 one hundred and twenty-four  | 
        
| 
                 6V  | 
            
                 250A  | 
        |||
| 
                 300A  | 
        ||||
    
Mtb2000d5 air cooled   5V/400A
Operating system: remote control
※ output current of different models shall be made according to customer requirements ※

